Magnetism principles, magnetic fields, induction, permeability and reluctance; magnetization, lines of force, methods of testing, interpretation of indications; demagnetization, sensitivity assessment, etc.
The content of the training course on Penetrant Testing (Level 2) would consist of the following:-
- General Theory – Principles of Magnetic Particle Inspection
- Limitations – Advantages and disadvantages
- Principles of electricity
- Terms and definitions
- Magnetic materials – brief description of hysteresis
- Magnetic currents – description of AC, DC, HWR, FWR
- Methods of Magnetisation
- Contact current flow, Rigid coil, Threading bar, Prods
- Equipment – Checks and Calibrations
- Test Procedure, safety
- Demagnetisation
- Detectability of Defects
- Spurious and indications
- Interpretation and Reporting
- Post Test Procedures
- Basic Casting and Forgings Production – Crude and Finished Products
- Basic Welding Processes, Terms and weld defects
- Practical – Instruction Writing and Testing
- Standards and Specifications
Training Hours: 40 hours
The content of the training course on Magnetic Particle Testing(Level 1) would consist of the following:-
- General Theory – Principles of Magnetic Particle Inspection
- Limitations – Advantages and Disadvantages
- Principles of magnetism
- Terms and definitions of Magnetic Particles
- Magnetic materials – brief description of hysteresis
- Magnetic currents – description of AC, DC, HWR, FWR
- Methods of Magnetisation
- Contact current flow, Rigid coil, Threading bar, Prods
- Equipment – Checks and Calibrations
- Test procedures & safety measures
- Demagnetisation
- Detectability of Defects
- Spurious and indications
- Interpretation and Reporting
- Post Test Procedures
- Basic Casting and Forgings Production – Crude and Finished Products
- Basic Welding Processes, terms and weld defects
- Practical Training by Following Instructions
- Standards and Specifications
Training Hours: 24 hours
At the end of the course, attendees shall be able to:
- Select suitable NDT technique and test method to be used
- Define the limitations of application for the testing method
- Translate NDT standards and specifications into NDT instructions
- Conduct test as per specifications
- Interpret and evaluate results according to applicable standards
- Organise and report the results of non-destructive tests
- Meets syllabus requirements for PCN or ISO9712 examinations
Time Table Of Course (Level 2) :
Day 1 to Day 3
- Introduction of NDT
- Theory ( General,Specific and Product Technology )
- Course work
Day 4
- Equipment Introduction
- Capability of equipment
- Concentration contents
- Reporting Technique
Time Table Of Course (Level 1) :
Day 1 to Day 2
- Introduction of NDT
- Theory (General, Specific and Product Technology)
- Course work
Day 3
- Equipment Introduction
- Capability of equipment
- Reporting Techniques
*All Fees are subjected to 8% SST
| 5th January - 8th January 2026 |
| 12th January - 15th January 2026 |
| 19th January - 22nd January 2026 |
| 26th January - 29th January 2026 |
| 9th February - 12th February 2026 |
| 23rd February - 26th February 2026 |
| 2nd March - 5th March 2026 |
| 9th March - 12th March 2026 |
| 16th March - 19th March 2026 |
| 30th March - 2nd April 2026 |
| 6th April - 9th April 2026 |
| 13th April - 16th April 2026 |
| 20th April - 23rd April 2026 |
| 27th April - 30th April 2026 |
| 4th May - 7th May 2026 |
| 11th May - 14th May 2026 |
| 18th May - 21st May 2026 |
| 8th June - 11th June 2026 |
| 22nd June - 25th June 2026 |
| 29th June - 2nd July 2026 |
| 6th July - 9th July 2026 |
| 13th July - 16th July 2026 |
| 20th July - 23rd July 2026 |
| 27th July - 30th July 2026 |
| 3rd August - 6th August 2026 |
| 10th August - 13th August 2026 |
| 17th August - 20th August 2026 |
| 1st September - 4th September 2026 |
| 7th September - 10th September 2026 |
| 21st September - 24th September 2026 |
| 28th September - 1st October 2026 |
| 5th October - 8th October 2026 |
| 12th October - 15th October 2026 |
| 19th October - 22nd October 2026 |
| 26th October - 29th October 2026 |
| 2nd November - 5th November 2026 |
| 16th November - 19th November 2026 |
| 23rd November - 26th November 2026 |
| 30th November - 3rd December 2026 |
| 7th December - 10th December 2026 |
| 14th December - 17th December 2026 |
| 21st December - 24th December 2026 |
| 28th December - 31st December 2026 |
* Training dates may be postponed or cancelled without prior notice unless we have confirmed your slot.
No.18, Jalan Tanjung SD13/2,
Bandar Sri Damansara,
52200 Kuala Lumpur,
Malaysia
Mondays to Fridays
9.00am - 5.30pm
Saturdays, Sundays and Public Holidays
Closed
E-mail info@mindt.com.my
Note: Please add our email info@mindt.com.my to your address book to avoid our email going to your spam folder.
TELEPHONE +603 6280 3448
MOBILE +6011 6518 0600